H&K USP 9mm, .40 Compact

MTR Custom Double Magazine Carrier with Belt Slots

MTR Custom Double Magazine Carrier The MTR Custom double mag carrier is designed as a double magazine carrier that attaches to the belt via two belt slots. The carrier features 2 retention screws so the wearer can adjust the mag tension to his or her...

Don Hume IWB Strike Tuckable IWB Holster

The IWB Strike is designed as an inside the waistband concealment holster that can be worn on the strongside (3 o’clock for RH shooters), or just behind the hip. The Strike has an interesting history that started back 2003 when the Transportation...

MTR Custom Vertical Deluxe Full-Size Quick Snap Holster

MTR Custom Vertical Deluxe Full Size Quick Snap Holster When MTR Custom introduced the Deluxe Full Size Quick Snap holster, it was quite a success. However, a number of customers kept asking if that model could be done in a 0 or no cant version, instead...

Don Hume JIT Belt Slide Holster

Over the last 10 years, the Don Hume JIT slide has been their top selling holster model. The JIT (which stands for Just In Time) Slide is designed to carry medium sized to small revolvers and autos in a highly concealed manner. This holster has an open...

MTR Custom Tuckable Adversary Clip-On IWB Holster with a Bodyshield

MTR Custom Tuckable Adversary Clip-On IWB Holster With a Bodyshield While the MTR Custom Adversary clip-on IWB has been a very popular design, MTR decided to take the Adversary to a different level by adding a tuckable option to the original design...

MTR Custom Slim-Line Deluxe Full-Size Pancake Holster

MTR Custom Slim-Line Deluxe Full-Size Pancake Holster Designed for those who want a high quality pancake holster without the weight and size normally associated with a full size pancake holster. MTR Custom took their popular Deluxe Full-Size Pancake...

MTR Custom Single IWB Clip-on Magazine Carrier

MTR Custom Single IWB Clip-on Magazine Carrier The MTR Custom clip-on IWB single mag carrier is designed for situations when you need to carry an extra mag in a concealed manner. Like their popular MTR Adversary Clip-on IWB holster, this carrier...

MTR Custom Double Paddle Magazine Carrier

MTR Custom Double Paddle Magazine Carrier The MTR Custom double paddle mag carrier is designed for scenarios where you want to carry 2 mags but don't want to deal with the hassle of removing your belt every time you need to put on or take off the mag...

MTR Custom Back Pocket Holster

The MTR Custom Back Pocket holster is designed to be carried in the back pocket of the desired shooting hand. So a RH model would be designed to be worn in the right rear back pocket while a LH model would be designed to be worn in the left side rear...

MTR Custom Front Pocket Holster

The MTR Custom front pocket holster is made to carry a small semi-auto or revolver in the front pocket. The holster is designed with rough leather on the outside to keep the holster upright and stable in the pocket. The interior of the holster is slick...

MTR Custom Deluxe Full-Size Quick Snap Holster

MTR Custom Deluxe Full Size Quick Snap Holster When MTR Custom introduced the Full Size Quick Snap holster, it was quite a success. However, a number of customers kept asking if that model could be done with a forward cant instead of a 0 or no cant...

MTR Custom Single Magazine Carrier

MTR Custom Single Magazine Carrier The MTR Custom single mag carrier is designed for scenarios where you need to a comfortable and efficient way to carry a spare magazine. This model is available in 3 different carrying configurations: Belt slot...

Don Hume H720-OT Open Top Paddle Holster

Type a description for this product here...

Don Hume H726 Belt Holster

The Don Hume H726 is very similar in design to the popular Don Hume H721 holster, except that the H726 is only produced to fit semi-automatic weapons. Designed for larger frame pistols, the H726 features a cutaway area in the front of the holster so the...

MTR Custom Dual Purpose Holster

MTR Custom Dual Carry Holster Traditionally, most gun holster models are designed to be worn one particular way or style, and that’s about it. In the past, we’ve seen holster models that were advertised as being able to be carried or used in...

Don Hume H715M WC Clip-On Inside the Waistband Holster

Don Hume H715M W/C Clip-On Inside the Waistband (IWB) Holster Since it's introduction in 1998, the Hume H715M W/C (With Clip) inside the waistband holster has been very well received by the concealed carry community. With the H715M W/C, Hume set out to...

MTR Custom Crossdraw Holster

MTR Custom Cross Draw Holster There are certain situations where a cross draw holster may be the best option for carry, and MTR Custom has designed their Cross Draw holster to fulfill that need. A major challenge in designing an effective cross draw...

MTR Custom Small of the Back (SOB) Defense Holster

MTR Custom SOB Defense Holster The MTR Custom SOB Defense holster was specifically designed for small of the back carry. One of the more common problems with some SOB designed holsters centered on the angle of the draw. MTR built the SOB Defense with a...

MTR Custom Adversary Clip-On IWB Holster with a Bodyshield

MTR Custom Adversary Clip-On IWB Holster With a Bodyshield   The MTR Custom Adversary is a clip-on inside the waistband (IWB) holster with a reinforced body shield. The idea for the Adversary surfaced when MTR decided to produce a clip-on IWB with...

Don Hume Elite Single Magazine Carrier with Belt Slot

Don Hume Elite Single Magazine Carrier with Belt Slot   The Don Hume Elite is a slim, single magazine carrier with a single belt loop that will fit belts up to 1 3/4 inches wide. The carrier sits vertically on the belts, and is produced in a LH ad...

Don Hume DAH Small of The Back Holster

Don Hume DAH Small of the Back or Belt Holster Although designed more for small of the back use, the DAH is a dual purpose holster that can be worn either as a small of the back holster or as a strong side belt holster. The DAH model name actaully...

Don Hume H770AA Shoulder Holster with Double Magazine Carrier

This hand molded shoulder holster is designed to be worn horizontally. It features a hand boned holster for positive retention and fit. The harness provides total range of motion, yet allows for excellent concealment. The holster features a reinforced...

Don Hume H710 "First Agent" Belt Holster

The Don Hume H710 was designed as a small, light strong side belt holster that works for concealment or general use. The H710 attaches to the belt using two belt slots. One slot is located directly behind the holster and the second slot is a trailing...

Don Hume Ankle Safe Ankle Holster

The Don Hume Ankle Safe features a neoprene wrap with Velcro closure and sheep skin padding for comfort. The holster body is made of cowhide leather, and is hand boned for a custom fit. The holster is only available in black leather, and comes in right...

Don Hume H715M SOOT Snap On IWB Holster

Another variation of the popular H715M W/C inside the waistband model, the H715M SOOT or MSO as it's sometimes called is an inside the waistband (IWB) holster that attaches to the belt using 2 leather snap-on loops. Like the standard H715M, the snap-on...

Don Hume H760 Ankle Holster

Don Hume Ankle Holster (H760) Designed for small frame automatics and revolvers, the H760 is an ideal rig for a second weapon or concealed carry. Designed for comfort, it comes with quality foam padding and suede covering. It also features detailed...

Don Hume H715M WCS Clip-On IWB Holster With Bodyshield

The popularity of the standard Don Hume H715M W/C clip-on IWB model, coupled with customer requests, led Don Hume to create the H715M WCS model. This model is identical to the standard clip-on IWB, except that it also features an added body shield. The...

Don Hume H721 Belt Holster

The Don Hume H721 (or "Double Nine") is made with a metal reinforced thumb break with recessed snap and double stitched sew lines at stress areas. This pancake style holster features two belt slots for easy positioning on the belt line, as well as a...